Air compression / Lubricant technology

AERO 8000

Mineral Air Compressor Lubricant (Series 390)

Mineral air compressor lubricant for piston and rotary screw compressors, including high-temperature duty and hot, humid environments. Fluid life reaches up to 10,000 hours below 90 °C (194 °F), with five grades from ISO VG 32 to 150.

Technical precision.
Application-specific support.
NEXT / AIR COMPRESSION
PRODUCT RANGE
AERO 8000 lubricant packaging
Base Oil Type
Mineral
ISO Viscosity Range
VG 32 – 150
Fluid Life
Up to 10,000 hrs (<90°C)
Application
Piston & Rotary Screw Compressors
01 / Product overview

Formulated for
real operating demands.

AERO 8000 is formulated from highly refined mineral base stocks for piston and rotary screw air compressors. It is designed for high-temperature duty and operation in hot, humid environments, with excellent wear protection and good water separation.

The formulation resists chemical contamination and foaming, with excellent air release. It meets DIN 51506 VDL requirements and is also suited for hydraulic systems.

Fluid life depends on discharge temperature: up to 10,000 hours below 90 °C (194 °F), up to 8,000 hours at 90–100 °C (194–212 °F), and 6,000 hours at 100–110 °C (212–230 °F). Routine fluid analysis is recommended to assess the lubricant’s in-service condition.

02 / Performance characteristics

Purpose in every
part of the formulation.

Product characteristics that support performance in the intended application.

01

Temperature-Dependent Fluid Life

Up to 10,000 hours below 90 °C (194 °F), with published service-life guidance for discharge temperatures up to 110 °C (230 °F).

02

Hot & Humid Environments

Formulated for air compressors operating in high-temperature duty and hot, humid conditions.

03

Wear Protection

Excellent wear protection for the lubricated compressor components.

04

Water Separation

Good separation of water from the lubricant.

05

Chemical Contamination Resistance

Resists chemical contamination during the intended service.

06

Foam Resistance & Air Release

Resists foaming and provides excellent air release.

03 / Technical specifications

Data for informed
product selection.

PropertyTest method324668100150
Viscosity @ 40 °C / 104 °F (cSt)—314566100140
Viscosity @ 100 °C / 212 °F (cSt)—5.26.78.611.515.0
Viscosity Index—9798101102108
Density @ 15 °C / 59 °F (g/cm³)—0.870.870.870.870.87
Pour Point (°C / °F)—-45 / -49-42 / -44-39 / -38-36 / -33-33 / -27
Flash Point (°C / °F)—220 / 428229 / 444242 / 468262 / 504266 / 511
ColorASTM D1500≤0.5≤0.5≤0.5≤0.5≤0.5
Copper Strip CorrosionD1301a1a1a1a1a
Rust Test (Distilled H₂O)D665Pass/PassPass/PassPass/PassPass/PassPass/Pass

Values are typical and do not constitute a specification. Manufacturing specifications are available on request. Specifications are subject to change due to formulation or raw-material updates; always verify that the technical data sheet is the current version. Test methods are shown only where stated in the supplied technical data sheet.

Routine fluid analysis is recommended to assess the in-service condition of the lubricant.

Product Specifications
Base Oil TypeMineral
ISO Viscosity RangeVG 32 – 150
Fluid LifeUp to 10,000 hrs (<90°C)
ApplicationPiston & Rotary Screw Compressors
Performance RequirementDIN 51506 VDL
Product Series390
Product equivalence

Know your current lubricant?
Find your NEXT reference.

Compare published references by manufacturer, product and viscosity. Our technical team can confirm application suitability.