Gas compression / Lubricant technology

NEXT GPL E

Ester Gas Compressor Lubricant (Series 264)

Fully ester-based gas compressor lubricant for biomethane and hydrocarbon gas compression prone to carbon and varnish deposits.

Technical precision.
Application-specific support.
NEXT / GAS COMPRESSION
PRODUCT RANGE
NEXT GPL E lubricant packaging
Base Oil Type
Ester (Fully Ester-Based)
ISO Viscosity Range
VG 32 – 220
Compatible Gases
Biomethane · Methane · Hydrocarbon gases
Application
Process & Hydrocarbon Gas Compression · Cogeneration
01 / Product overview

Formulated for
real operating demands.

NEXT GPL E is a fully ester-based gas compressor lubricant for rotary screw and reciprocating compressors in biomethane compression, cogeneration and methane recovery, and high-temperature hydrocarbon gas compression — the duties where carbon and varnish formation sets the lubricant requirement. The ester base stocks carry inherent solvency: they dissolve deposit precursors and keep carbon and varnish from accumulating over the service interval.

Low volatility limits lubricant carryover, consumption, and downstream contamination, and pour points reach −45 °C (−49 °F) at the lightest grade for low-temperature operation. Available from VG 32 to VG 220, NEXT GPL E runs alongside the diester blend NEXT GPL DE in the gas compression range — the fully ester chemistry, with the wider grade span and the biomethane-led duty.

02 / Performance characteristics

Purpose in every
part of the formulation.

Product characteristics that support performance in the intended application.

01

Carbon & Varnish Control

Ester base stocks dissolve deposit precursors and keep internals clean over the service interval.

02

Biomethane & Methane Recovery

Formulated for biomethane compression, cogeneration, and methane recovery duty.

03

High-Temperature Gas Compression

Ester thermal stability carries elevated discharge temperature service.

04

Low Lubricant Carryover

Low volatility limits lubricant losses and downstream contamination.

05

Low-Temperature Fluidity

Pour points from −45 °C (−49 °F) to −33 °C (−27 °F) across the range.

03 / Technical specifications

Data for informed
product selection.

Property Test method 32 46 68 100 150 220
Kin. Viscosity @ 40 °C (104 °F) ASTM D445 32 46 68 100 150 220
Kin. Viscosity @ 100 °C (212 °F) ASTM D445 5.2 6.6 9.2 12.0 16.4 23.1
Viscosity Index ASTM D2270 87 90 110 110 115 122
Density @ 15 °C (59 °F) (g/cm³) ASTM D4052 0.93 0.93 0.94 0.94 0.93 0.93
Pour Point, °C (°F) ASTM D97 -45 (-49) -42 (-44) -40 (-40) -40 (-40) -39 (-38) -33 (-27)
Flash Point, °C (°F) ASTM D92 228 (442) 233 (451) 235 (455) 245 (473) 253 (487) 265 (509)

* Values shown are typical and may vary within specification limits. Viscosity values in mm²/s. Temperatures shown as °C (°F).

Product Specifications
Base Oil Type Ester (Fully Ester-Based)
ISO Viscosity Range VG 32 – 220
Compatible Gases Biomethane · Methane · Hydrocarbon gases
Application Process & Hydrocarbon Gas Compression · Cogeneration
Product equivalence

Know your current lubricant?
Find your NEXT reference.

Compare published references by manufacturer, product and viscosity. Our technical team can confirm application suitability.